TDS
CHEMICAL NAME – N –Cyclohexylbenzothiazole -2-sulfenamide
SUPPLY FORM – Greyish white pellets (Dia – 3.5 mm)/ Powder
TEST | NOMINAL VALUE | METHOD |
Melting point initial (°C) | 99.0 Min. | ASTM D1519A |
Melting point Final (°C) | 100 .0 Min | ASTM D1519A |
Loss on drying 60°C/ 2 hrs. (%) | 0.50 Max. | ASTM D 4571 |
Ash Content 760°C/ 2 hrs. (%) | 0.15 Max. | ASTM D 4574 |
Methanol Insolubles (%) | 0.50 Max. | ASTM D 4934 |
Assay (%) | 95.0 Min | ASTM D 4936 |
Free Amine as Cyclohexyl amine (%) | 0.50 Max | ASTM D 4936 |
Fineness though 100 mesh (%) (For powder product) | 99.90 Min | ASTM D 5461 |
Oil content (%) | 1.0 – 2.0 | In house method |
ADDITIONAL INFORMATION | ||
Specific Gravity | 1.30 – 1.40 | ASTM D 1817 |
Bulk Density (kg/m3) | 650-750 | In house method |
Packaging: | Open mouth HDPE fabric bag with paper on the outside. 20 kgs.Net. | |
Storage Life: | Six months from the date of production. | |
Storage conditions: | Keep cool and dry in original packaging. | |
Product Safety: | Relevant safety data and references as well as the necessary hazard warning labels can be found in the safety data sheet. |
APPLICATION
TYPICAL DOSAGES OF MERCURE CBS | |||||||
Product |
Rubber | Accelerator / Sulphur, phr | |||||
CBS | MBTS | TMTD | TMTM | PVI (CTP) |
S |
||
Auto Tyres TreadsCasing |
NR |
0.5-0.7 |
– |
– |
– |
0.10-0.15 |
2.4* |
Cycle Tyre Treads |
NR-RR |
1.0 |
– |
0.1-0.15 |
– |
0.1-0.2 |
2.4 |
ConveyorBelt Cover General PurposeHeat Resistant |
NR |
0.7 |
0.2 |
– |
– |
0.15 |
2.4 |
Transmission Belts | NR | 0.8 | – | 0.1 | – | 0.15 | 3.0 |
V Belts Base Cushion Friction |
NR |
0.6 |
0.2 |
– |
– |
0.2 |
3.0 |
Retreads (Truck) Hot CurePre Cured Cushion- Hot Cure |
NR |
0.6 |
– |
– |
– |
0.20 |
2.4* |
Footwear DV Soles Molded Soles & Heels |
NR-SBR |
1.0 |
0.3 |
0.1 |
– |
0.10 |
2.0 |
Hoses Tube
Hoses Cover |
NR NR-SR NBR NBR NR |
0.8-1.0 1.0-1.2 1.5 0.7 0.8 |
– – – – – |
0.10 0.20 0.50 0.10 0.10 |
– – – – – |
0.10 0.10 0.10 0.15 0.15 |
2.2 1.5 0.7 1.8 2.2 |
Cables | NR | 1.0 | – | 0.20 | ZDEC-0.2 | 0.15 | 1.2 |
Injection Mouldings | NR | 0.6 | – | – | – | 0.30 | 2.4 |
Molded & Extruded Goods |
NR |
0.7 2.0 1.5 1.0 2.0 |
– – – |
0.15 0.50 3.0 1.0 3.0 |
– – – |
0.10 0.10 0.20 – – |
2.2 0.75 0.30 1.0 0.3 |
Note: * Insoluble Sulphur (100% active content basis) |