TDS
CHEMICAL NAME – Physical Blend of Thiazole accelerator and secondary accelerator
SUPPLY FORM – Pale yellow powder
TEST | NOMINAL VALUE | METHOD |
Melting point Initial (°C) | 142.0 Min. | ASTM D1519A |
Melting point Final (°C) | 145.0 Min | ASTM D1519A |
Loss on drying 60°C / 2 hrs. (%) | 0.75 Max. | ASTM D 4571 |
Ash Content 760°C/ 2 hrs. (%) | 0.75 Max. | ASTM D 4574 |
Fineness though 100 mesh (%) | 99.90 Min | ASTM D 5461 |
Oil Content (%) | 1.0 – 2.0 | In house method |
ADDITIONAL INFORMATION | ||
Specific gravity at RT | 1.35 – 1.45 | ASTM D 1817 |
Bulk Density (kg/m3) | 350 – 400 | In house method |
Packaging: | Open mouth HDPE fabric bag with paper on the outside. 20 kgs.Net. | |
Storage Life: | One year from the date of production. | |
Storage conditions: | Keep cool and dry in original packaging. | |
Product Safety: | Relevant safety data and references as well as the necessary hazard warning labels can be found in the safety data sheet. |
This information and our technical advice – whether verbal, in writing or by way of trials – are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with our General Conditions of Sale and Delivery.
APPLICATION
TYPICAL DOSAGES OF MERCURE F | ||||||
Product |
Rubber | Accelerator / Sulphur, phr | ||||
F | MBTS | TMTD | ZDBC |
S |
||
Cycle Tyre Treads
Coloured Cycle Tyres |
NR-RR NR-SR NR-SR NR |
1.0-1.2 1.2-1.5 1.2-1.5 1.2-1.5 |
– – – – |
0.0-0.15 0.15-0.25 – 0.1-0.2 |
– – 0.2-0.3 – |
2.2-2.5 2.0-2.2 2.2 2.75 |
Footwear Microcellular Soling Soles & Heels Coloured Footwear Hot air cured footwear |
NR-SBR |
1.2-1.5 |
– |
0.0-0.10 |
– |
2.2-2.5 |
Hot Air Cured
Products |
NR/SBR | 1.3-1.5 | – | – | 0.2-0.4 | 2.2-2.4 |
Cables | NR | 1.5 | – | – | – | 0.8-1.0 |
Molded & Extruded Goods | NR SBR NBR |
0.8 1.0 1.2 |
0.4 0.4 0.3 |
– 0.0-0.2 0.0-0.2 |
– – – |
2.2-2.5 2.0-2.2 1.5 |
Hard Rubber Products Rollers Ebonite products |
NR |
1.5 |
– |
– |
– |
4.0-8.0 |